10 Best Wheel Hub And Bearing Assemblies For Honda Civic 2026

Choosing the right wheel hub and bearing assembly for Honda Civic models is mostly about fitment, drivetrain, and trim compatibility. A mismatched part can cause noise, vibration, or an installation headache.

This roundup highlights options for common Civic generations and rear or front applications, so you can compare parts faster and buy with more confidence.

Best 10 Wheel Hub and Bearing Assembly for Honda Civic Picks for 2026

Best Direct Replacement – Front Knuckle & Wheel Hub for Civic 2006-2011

If you need a wheel hub and bearing assembly for Honda Civic models from 2006-2011, this AEagle front steering knuckle assembly is aimed at drivers who want a direct swap with the bearings already pressed in. It covers the left and right front sides, helps avoid extra pressing work, and is a practical fit for non-Si, non-2.0L Civic trims when replacing worn or damaged front knuckles.

Best For: Civic owners who want a ready-to-install front knuckle and hub assembly for a straightforward replacement on compatible 2006-2011 models.

Pros:

• Bearings are already pressed in, which saves installation time
• Fits front left and right sides for compatible Civic trims
• Designed to address noise, wobble, vibration, and uneven tire wear
• Anti-corrosion finish and one-year warranty add peace of mind

Cons:

• Not compatible with Si, MUGEN Si, or 2.0L models
• Heavy at 33.1 pounds, so installation may be easier with help
• Fitment should be verified carefully before ordering

This wheel hub and bearing assembly for Honda Civic is a strong pick if you want a complete front-end replacement that minimizes extra labor and matches the original part numbers closely. Just double-check trim and engine compatibility before buying.

Reliable OE Fit – A-Premium Rear Wheel Hub & Bearing Set

If you need a wheel hub and bearing assembly for Honda Civic models with a rear 5-lug setup, this A-Premium pair is built for 2013-2015 FWD trims and aims to replace noisy, worn-out hubs with an OE-style fit. It includes the key components needed to address vibration, grease leakage, and bearing wear without changing the factory wheel and rotor interface.

Best For: Civic owners replacing both rear hub assemblies on a FWD 2013-2015 model who want a straightforward, factory-style repair.

Pros:

• Fits multiple Honda Civic trims from 2013-2015, including EX, EX-L, Si, DX, and SE
• 5-lug, pre-greased, OE-spec design with included rear left and right assemblies
• Built with steel components and backed by a one-year unlimited-mileage guarantee

Cons:

• FWD only, so it will not fit all Civic drivetrains
• No speed sensor included
• Sold as a rear pair, which may be more than single-side shoppers need

This is a practical pick if you want a wheel hub and bearing assembly for Honda Civic maintenance that focuses on compatibility and a direct-replacement fit rather than extra features. It makes the most sense for drivers restoring a quiet, smooth rear end on the right Civic trim.

Best for Complete Front-End Replacement – Detroit Axle Civic Knuckle & Hub Kit

If you want a practical wheel hub and bearing assembly for Honda Civic repairs, this Detroit Axle kit is built for replacing the front steering knuckles and hubs together. It’s a solid choice for drivers dealing with worn bearings, damaged knuckles, or a front-end refresh on compatible Civic trims, with OEM-style fitment and pre-assembled components to simplify installation.

Best For: Civic owners who need a complete front steering knuckle and hub replacement kit rather than a single-part swap.

Pros:

• Includes 2 front steering knuckles and wheel bearing hub assemblies
• Pre-assembled design helps reduce install time and extra labor
• Cast iron construction is built for durability under suspension stress
• Backed by a 10-year warranty

Cons:

• Fitment excludes Si and some special submodels
• More than needed if you only want a hub-only replacement
• Heavier kit than a basic bearing assembly

For compatible Civic models, this wheel hub and bearing assembly for Honda Civic stands out as a convenient, all-in-one front-end repair option that can save time during installation. It’s especially appealing if you want to replace both sides with a matched kit instead of piecing together individual parts.

Best Rear 5-Lug Replacement – A-Premium Rear Hub Bearing Assembly

If you need a straightforward wheel hub and bearing assembly for Honda Civic models from 2016-2021, this A-Premium rear set is built to replace worn parts that cause noise, vibration, and grease leakage. It’s a practical OE-style option for drivers who want a clean fitment match on the rear left and right sides.

Best For: Civic and Insight owners looking for an affordable rear hub-and-bearing replacement with 5-lug fitment and a simple bolt-on style.

Pros:

• Compatible with Honda Civic 2016-2021 and Insight 2019-2022
• Rear left/right assembly with 5-lug, OE-style dimensions
• Pre-greased ball bearing design helps restore quiet operation
• One-year unlimited-mileage warranty adds peace of mind

Cons:

• No speed sensor included
• Rear-only fitment, so it won’t work for front axle jobs
• Fitment should be verified carefully by model year and trim

For shoppers comparing a wheel hub and bearing assembly for Honda Civic, this A-Premium kit stands out as a sensible replacement when the goal is to stop rear-end humming and regain stable road feel without paying for a premium upgrade.

Best Fit for 1.8L Civics – Front Knuckle Hub Assembly Set

If you need a replacement wheel hub and bearing assembly for Honda Civic models from 2006 to 2011, this front steering knuckle set is aimed at drivers with 1.3L and 1.8L trims who want a direct-fit repair part. It includes both left driver and right passenger side assemblies, making it a practical choice when you want to restore smooth wheel operation and braking response without hunting for separate components.

Best For: Civic owners with 2006-2011 1.3L or 1.8L models who need both front steering knuckle and hub assemblies in one purchase.

Pros:

• Fits both front driver and passenger sides in one set
• Compatible with 2006-2011 Honda Civic 1.3L and 1.8L models
• Built with a corrosion-resistant coating for added durability
• Can help address vibration, uneven wear, and wheel noise

Cons:

• Does not fit Si, MUGEN Si, or 2.0L models
• Heavier replacement part at 33.4 pounds
• Only useful if you need the full steering knuckle assembly, not just the bearing

As a complete front-end replacement, this wheel hub and bearing assembly for Honda Civic is a strong option for owners who want a matched pair and an OE-style fit. Just double-check trim and engine compatibility before buying, since the exclusions are important here.

Best for 2012-2015 Civic Fitment – 2 Front Hub Bearing Assemblies for Civic 2012-2015

If you need a wheel hub and bearing assembly for Honda Civic replacement that matches the 2012-2015 1.5L or 1.8L DX, EX, LX, HF, or Hybrid models, this two-piece kit is aimed at straightforward OE-style fitment. It replaces part numbers 44600-TR0-A00, 44600TR0A00, and NT510089, but it does not fit 2.4L Si or EX-L versions, so double-check your trim before ordering.

Best For: Civic owners with compatible 2012-2015 DX, EX, LX, HF, or Hybrid models who want a direct-fit front hub and bearing replacement.

Pros:

• Fits a wide range of 2012-2015 Honda Civic 1.5L and 1.8L trims
• Includes two front hub bearing assemblies for a full front-end refresh
• OE-style replacement for common part numbers 44600-TR0-A00 and NT510089
• Backed by a 6-month quality issue contact window

Cons:

• Will not fit 2.4L Si or EX-L models
• Only 10 customer ratings, so long-term feedback is limited
• Some reviews mention mixed durability

As a value-minded wheel hub and bearing assembly for Honda Civic maintenance, this kit makes the most sense when the fitment matches exactly and you want a simple OE-replacement option for both front corners. Confirm your trim and engine first, then use the part-number match to avoid a return.

Best Pair Replacement – MOTOKU Rear Wheel Hub Set

If you need a direct-fit wheel hub and bearing assembly for Honda Civic models from 2016-2021, this MOTOKU pair is built to match common rear fitment needs on select Civic and Insight applications. It includes both left and right rear assemblies, uses a 5-lug ABS setup, and replaces OEM part numbers 512570, 42200-TBA-A01, and 42200-TBA-A02.

Best For: Drivers replacing both rear hub assemblies at once on compatible Honda Civic or Insight models who want an OEM-spec style match.

Pros:

• Includes both rear left and right hub and bearing assemblies
• OEM replacement fitment for select Honda Civic and Insight vehicles
• 5-lug ABS design with listed dimensions for easier cross-checking
• Matches multiple OEM part numbers for straightforward replacement

Cons:

• Only fits specific model years and trims, so VIN/part-number verification is important
• No extra hardware or installation accessories mentioned

This is a practical buy if you want a pair replacement rather than a single-side fix. For shoppers comparing a wheel hub and bearing assembly for Honda Civic, the main appeal is the included pair and OEM-style compatibility details.

Best with Extra Features – Front Right Steering Knuckle & Hub Assembly

If you need a wheel hub and bearing assembly for Honda Civic that replaces the steering knuckle, hub, and bearing in one shot, this TadaMark front-right assembly is aimed at 2006-2011 Civic 1.3L and 1.8L models. It’s a practical pick when the original unit is worn, noisy, or causing ABS and wheel-rotation issues, and you want a quicker fix than pressing bearings separately.

Best For: Civic owners who want a complete passenger-side replacement assembly for a straightforward repair.

Pros:

• Complete assembly can save time versus pressing in a separate bearing
• Fits multiple Honda Civic 2006-2011 1.3L/1.8L applications
• Heat-treated drop-forged steel construction for durability
• Strong user feedback for fit, value, and solving ABS-related problems

Cons:

• Not compatible with Si/MUGEN Si or 2.0L models
• Passenger-side only, so it won’t suit left-side repairs
• May require minor dust shield adjustment during installation

For shoppers comparing a wheel hub and bearing assembly for Honda Civic, this is a solid fit-first option if you want an all-in-one front-right replacement rather than rebuilding the hub piece by piece. The value and install savings make it especially appealing for DIY repairs and quick shop turnarounds.

Best OEM-Style Fit – Pair of Front Wheel Hub Bearing Assy for Civic 2006-2011

If you need a wheel hub and bearing assembly for Honda Civic models from 2006-2011, this pair is aimed at owners with 1.3L or 1.8L L4 engines who want an OEM-style replacement. It lists the key OE and interchange part numbers clearly, which helps reduce guesswork when matching the right front hub assemblies.

Best For: Civic owners who want a direct-fit front hub and bearing pair for 2006-2011 1.3L/1.8L applications.

Pros:

• Compatible with Honda Civic 2006-2011 1.3L and 1.8L L4 models
• Includes both left and right front wheel hub bearing assemblies
• Clear OE and interchange part numbers for easier fitment checking
• Backed by 24/7 customer support for questions

Cons:

• Not compatible with every Civic engine or trim, so fitment must be verified
• Only a small review history is available so far

For shoppers comparing a wheel hub and bearing assembly for Honda Civic, this TIMEPAL pair stands out for its direct replacement focus and simple part-number matching. Just confirm your exact year and engine before ordering, since compatibility is limited to specific 2006-2011 Civic configurations.

Best Fit for 2003-2005 Civic Replacement – Front Steering Knuckle Hub Assembly

If you need a wheel hub and bearing assembly for Honda Civic models from 2003 to 2005, this Youxmoto front steering knuckle assembly is built for a direct-fit replacement on 1.7L non-Si cars. It combines the steering knuckle, hub, and bearing into one unit, which can simplify a front-end repair when the original parts are worn, noisy, or causing vibration.

Best For: Civic owners with a 2003-2005 1.7L non-Si model who want a complete front left or right replacement assembly.

Pros:

• Direct fit for 2003-2005 Honda Civic 1.7L non-Si applications
• Includes hub, bearing, and steering knuckle in one assembly
• Helps address noise, uneven tire wear, shaking, and braking issues
• Protective coating adds resistance against rust and corrosion

Cons:

• Not compatible with Si models
• Vehicle-specific fit means double-checking part numbers is important
• Heavier than a basic hub-only replacement

This wheel hub and bearing assembly for Honda Civic is a practical option if you want a complete front-end replacement rather than sourcing the knuckle and hub separately. Its strongest appeal is fitment coverage for the right model years and its all-in-one design for faster repair planning.

How We Picked the Best Wheel Hub and Bearing Assembly for Honda Civic

We focused on exact vehicle fitment first, then looked at application type, axle position, and whether the part is sold as a single assembly or a pair. For a Wheel Hub and Bearing Assembly for Honda Civic, the best choice is the one that matches your year, trim, drivetrain, and front or rear position without requiring guesswork.

We also prioritized listings that clearly call out exclusions such as Si, Mugen Si, 2.0L, or AWD-related incompatibilities, since those details matter as much as the part itself.

Quick Comparison

Front assemblies are the most common replacement on older Civic models, while newer Civics often use rear hub assemblies depending on generation and drivetrain. Pair kits can be a good value if both sides are noisy or if you want to refresh the axle end at the same time. Steering knuckle kits are more comprehensive and may suit worn or damaged knuckles, but they are usually more involved than a simple hub swap.

Key Buying Factors for Wheel Hub and Bearing Assembly for Honda Civic

Year, Trim, and Engine Fitment

Match the part number and vehicle application carefully. Civic trims like DX, EX, LX, HF, Hybrid, and Si may use different hub designs, bolt patterns, or knuckle configurations. Even within the same generation, an incompatible engine or brake setup can make a part unusable.

Front Vs. Rear Position

Make sure you are buying the correct axle position. Front hub assemblies often differ from rear hub assemblies in design and installation hardware. If you are replacing both sides, confirm whether the listing is a pair or a single side.

Included Components

Some kits include the hub and bearing only, while others add steering knuckles, bolts, or both left and right sides. Choose the least complex option that still solves the problem. A larger kit can be worthwhile if your existing knuckle is damaged or corroded.

Drivetrain and Exclusion Notes

Pay close attention to notes like FWD only or not fit Si/Mugen Si models. These exclusions are often the difference between a clean install and a return.

Who Should Buy Which Wheel Hub and Bearing Assembly for Honda Civic?

If you need a straightforward repair for one noisy side, a single front or rear hub assembly is usually the most practical choice. If both sides have similar wear, a pair kit can save time and help maintain balanced performance. If the knuckle itself is bent, seized, or heavily rusted, a steering knuckle and hub assembly kit is the better long-term fix.

For the best results, verify compatibility using your VIN, compare the part description against your exact Civic trim, and inspect the brake and suspension layout before ordering.